My Cart

Close
Your cart is empty

Beva® 2.5 mil 371 Film Strip (Roll)

Part #: BS5392

$22.15

Beva® 2.5 mil 371 Film Strip (Roll) is ideal for creating transparent linings on paintings. Film strip is made of pure BEVA 371 Solution sandwiched between one sheet of 1.5 mil silicone-coated Mylar® release film and one sheet of 4 mil silicone-coated release paper, both completely transparent and dimensionally stable. The strip is non-liquid, solvent-free and is only activated by heat, so you can apply it to small, clearly defined areas without fear of it spreading. Its thin width makes it ideal for application in small areas, such as in framing. Just cut the strip to your desired length and place it where needed. Insert into loose areas. Activate adhesive with a hot air gun, tacking iron or vacuum heat table at a temperature of 150–160°F (65–70°C). Remove from absorbent surfaces with hexane or acetone (provided they do not damage the artwork). These solvents do not dissolve the film but merely swell it, so as not to contaminate or stain absorbent materials.
  • Designed for creating transparent linings on paintings
  • Thin width is ideal for framing applications
  • Made of pure Beva 371 Solution sandwiched between one sheet of 1.5 mil silicone-coated Mylar release film and one sheet of 4 mil silicone-coated release paper, both completely transparent and dimensionally stable
  • Cut to desired length and place where needed
  • Non-liquid; it can be applied to small, clearly defined areas without fear of spreading
  • Solvent-free; only activated by heat at a low temperature, between 150–160°F (65–70°C)
  • Completely reversible
Acid-free Yes
Material Beva 371, 1.5 mil silicone-coated Mylar release film, 4 mil silicone-coated release paper
Thickness (mil) 2.5
Width (in.) 0.5
Length 39 yds.
Color Clear
ODC